Generated by All in One SEO v4.9.9, this is an llms.txt file, used by LLMs to index the site.

# Bale Band-It

The best way to handle small square bales!

## Sitemaps

- [XML Sitemap](https://www.balebandit.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [2012 Illinois Forage Expo](https://www.balebandit.com/2012-illinois-forage-expo/) - GFC & the Bale Band-It had the privilege of hosting the 2012 Illinois Forage Expo on July 10th. The Forage Expo is sponsored by the Illinois Forage and Grassland Council and supported by the University of Illinois Extension, USDA Natural Resources Conservation Service, and Two Rivers RC&D. This year's event had an above average attendance

## Pages

- [Home](https://www.balebandit.com/)
- [Privacy Policy](https://www.balebandit.com/privacypolicy/)
- [Bale Band-It Model 220](https://www.balebandit.com/bale-band-it-model-220/) - Learn everything you need to about the revolutionary Bale Bandit
- [Service & Accessories](https://www.balebandit.com/service-accessories/)
- [Operation Code Support](https://www.balebandit.com/operation-code-support/)
- [Parts](https://www.balebandit.com/parts/)
- [Contact Us](https://www.balebandit.com/contact-us/) - Contact us to learn more about Bale Bandit and what it can do for you
- [Careers](https://www.balebandit.com/careers/)
- [Dealer Application](https://www.balebandit.com/dealer-application/)
- [Join the Brand](https://www.balebandit.com/join-the-brand/)
- [Buy Now](https://www.balebandit.com/buy-now/) - Contact us to learn more about Bale Bandit and what it can do for you
- [Monitor](https://www.balebandit.com/monitor/)
- [Seminars](https://www.balebandit.com/seminars/) - Contact us to learn more about Bale Bandit and what it can do for you
- [User Videos](https://www.balebandit.com/user-videos/) - 17 videos found About Pike Mfg Corp 2,247views Bale Band-It 254views Banders – Checking and Cleaning 1,462views General Support Videos Electrical Boards – Replacement 463views General Support Videos iBand-It App for Bale Band-It 2,266views General Support Videos Monitor – Linking via Bluetooth 667views General Support Videos Photo Eyes – Adjustments 640views General Support Videos Photo
- [Player Embed](https://www.balebandit.com/player-embed/)
- [Search Videos](https://www.balebandit.com/search-videos/) - 17 videos found About Pike Mfg Corp 2,247views Bale Band-It 254views Banders – Checking and Cleaning 1,462views General Support Videos Electrical Boards – Replacement 463views General Support Videos iBand-It App for Bale Band-It 2,266views General Support Videos Monitor – Linking via Bluetooth 667views General Support Videos Photo Eyes – Adjustments 640views General Support Videos Photo
- [Video Tag](https://www.balebandit.com/video-tag/) - No tags found
- [Video Category](https://www.balebandit.com/video-category/) - Home » Video Category Bale Band-It Seminar 5 videos Baler Videos 0 videos General Support Videos 10 videos

## Videos

- [Bale Band-It](https://www.balebandit.com/aiovg_videos/bale-band-it/)
- [About Pike Mfg Corp](https://www.balebandit.com/aiovg_videos/about-pmfg/)
- [Electrical Boards - Replacement](https://www.balebandit.com/aiovg_videos/replacing-electrical-boards/)
- [iBand-It App for Bale Band-It](https://www.balebandit.com/aiovg_videos/iband-it-app-for-bale-band-it/)
- [Seminar Part 5](https://www.balebandit.com/aiovg_videos/seminar-part-5/)
- [Seminar Part 4](https://www.balebandit.com/aiovg_videos/seminar-part-4/)
- [Seminar Part 3](https://www.balebandit.com/aiovg_videos/seminar-part-3/)
- [Seminar Part 2](https://www.balebandit.com/aiovg_videos/seminar-part-2/)
- [Seminar Part 1](https://www.balebandit.com/aiovg_videos/seminar-part-1/)
- [Monitor - Linking via Bluetooth](https://www.balebandit.com/aiovg_videos/monitor-linking-via-bluetooth/) - This video describes how to link the Bluetooth monitor to the Bale Band-It. Note that the monitor has been replaced by a high-quality iPad app on more recent Bale Band-It machines.
- [Reed Switches - Overview](https://www.balebandit.com/aiovg_videos/reed-switches/)
- [Relay Boards - Overview](https://www.balebandit.com/aiovg_videos/understanding-relay-boards/)
- [Sensor Bar - Overview](https://www.balebandit.com/aiovg_videos/sensor-bar/)
- [Banders - Checking and Cleaning](https://www.balebandit.com/aiovg_videos/checking-and-cleaning-banders/)
- [Threading the Bale Band-It](https://www.balebandit.com/aiovg_videos/threading/)
- [Photo Eyes - Adjustments](https://www.balebandit.com/aiovg_videos/photo-eye-adjustments/)
- [Photo Eyes - Overview](https://www.balebandit.com/aiovg_videos/photo-eyes-overview/)

## FAQs

- [098 - Computer Error](https://www.balebandit.com/ufaqs/098-computer-error/) - https://youtu.be/Vpeh0Zp-U1I - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power. If this doesn’t change the “098” code, then take out all bales in front chamber by opening the side doors. Once the bales are out, press the Reset Bundle button.
- [098 - Computer Error](https://www.balebandit.com/ufaqs/098-computer-error-2/) - https://youtu.be/Vpeh0Zp-U1I - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power. If this doesn’t change the “098” code, then take out all bales in front chamber by opening the side doors. Once the bales are out, press the Reset Bundle button.
- [016 - Computer Error](https://www.balebandit.com/ufaqs/016-computer-error/) - https://youtu.be/KOR4zimmdHU - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power. If this doesn’t change the “098” code, then take out all bales in front chamber by opening the side doors. Once the bales are out, press the Reset Bundle button.
- [016 - Computer Error](https://www.balebandit.com/ufaqs/016-computer-error-2/) - https://youtu.be/KOR4zimmdHU - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power. If this doesn’t change the “098” code, then take out all bales in front chamber by opening the side doors. Once the bales are out, press the Reset Bundle button.
- [003 - Waiting for Kicker reed switch to be off.](https://www.balebandit.com/ufaqs/003-waiting-for-kicker-reed-switch-to-be-off/) - https://youtu.be/YhU3Gx4Dwy0 Note: Before the machine extends the Kicker cylinder, the Kicker reed switch is in front of the first magnet mounted in the round plastic. When the machine extends the Kicker cylinder it rotates the round plastic, moving the first magnet away from the switch, which turns the Kicker reed switch off. This is what
- [003 - Waiting for Kicker reed switch to be off.](https://www.balebandit.com/ufaqs/003-waiting-for-kicker-reed-switch-to-be-off-2/) - https://youtu.be/YhU3Gx4Dwy0 Note: Before the machine extends the Kicker cylinder, the Kicker reed switch is in front of the first magnet mounted in the round plastic. When the machine extends the Kicker cylinder it rotates the round plastic, moving the first magnet away from the switch, which turns the Kicker reed switch off. This is what
- [004 - Waiting for Kicker reed switch to be on.](https://www.balebandit.com/ufaqs/004-waiting-for-kicker-reed-switch-to-be-on/) - https://youtu.be/lRISoFvcg88 Note: After the machine has extended the Kicker cylinder, the Kicker reed switch should be lined up with the magnet mounded in the round plastic, which turns the switch on. This is what the machine is waiting for. If the Kicker cylinder is fully extended, - Check the air gap distance between the Kicker
- [004 - Waiting for Kicker reed switch to be on.](https://www.balebandit.com/ufaqs/004-waiting-for-kicker-reed-switch-to-be-on-2/) - https://youtu.be/lRISoFvcg88 Note: After the machine has extended the Kicker cylinder, the Kicker reed switch should be lined up with the magnet mounded in the round plastic, which turns the switch on. This is what the machine is waiting for. If the Kicker cylinder is fully extended, - Check the air gap distance between the Kicker
- [077 - Timer Delay Error](https://www.balebandit.com/ufaqs/077-timer-delay-error/) - https://youtu.be/4AV4ILrbjmc - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [077 - Timer Delay Error](https://www.balebandit.com/ufaqs/077-timer-delay-error-2/) - https://youtu.be/4AV4ILrbjmc - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [074 - Timer Delay Error](https://www.balebandit.com/ufaqs/074-timer-delay-error/) - https://youtu.be/9MQ8bvjod-k - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [074 - Timer Delay Error](https://www.balebandit.com/ufaqs/074-timer-delay-error-2/) - https://youtu.be/9MQ8bvjod-k - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [070 - Timer Delay Error](https://www.balebandit.com/ufaqs/070-timer-delay-error/) - https://youtu.be/PVvGybNQBOg - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [070 - Timer Delay Error](https://www.balebandit.com/ufaqs/070-timer-delay-error-2/) - https://youtu.be/PVvGybNQBOg - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [066 - Timer Delay Error](https://www.balebandit.com/ufaqs/066-timer-delay-error/) - https://youtu.be/iEP1nXlCGcw - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [066 - Timer Delay Error](https://www.balebandit.com/ufaqs/066-timer-delay-error-2/) - https://youtu.be/iEP1nXlCGcw - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [061 - Timer Delay Error](https://www.balebandit.com/ufaqs/061-timer-delay-error/) - https://youtu.be/8ryk-EjU_qo - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [061 - Timer Delay Error](https://www.balebandit.com/ufaqs/061-timer-delay-error-2/) - https://youtu.be/8ryk-EjU_qo - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [060 - Timer Delay Error](https://www.balebandit.com/ufaqs/060-timer-delay-error/) - https://youtu.be/CuXMJ7ue8Z0 - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [060 - Timer Delay Error](https://www.balebandit.com/ufaqs/060-timer-delay-error-2/) - https://youtu.be/CuXMJ7ue8Z0 - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [054 - Timer Delay Error](https://www.balebandit.com/ufaqs/054-timer-delay-error/) - https://youtu.be/h52Z0KRQEvM - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [054 - Timer Delay Error](https://www.balebandit.com/ufaqs/054-timer-delay-error-2/) - https://youtu.be/h52Z0KRQEvM - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [047 - Timer Delay Error](https://www.balebandit.com/ufaqs/047-timer-delay-error/) - https://youtu.be/TDQmnZiOVKQ - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [047 - Timer Delay Error](https://www.balebandit.com/ufaqs/047-timer-delay-error-2/) - https://youtu.be/TDQmnZiOVKQ - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [042 - Timer Delay Error](https://www.balebandit.com/ufaqs/042-timer-delay-error/) - https://youtu.be/FRHvgTcLpPA - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [042 - Timer Delay Error](https://www.balebandit.com/ufaqs/042-timer-delay-error-2/) - https://youtu.be/FRHvgTcLpPA - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [038 - Timer Delay Error](https://www.balebandit.com/ufaqs/038-timer-delay-error/) - https://youtu.be/N8gkmCIMieY - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [038 - Timer Delay Error](https://www.balebandit.com/ufaqs/038-timer-delay-error-2/) - https://youtu.be/N8gkmCIMieY - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [036 - Timer Delay Error](https://www.balebandit.com/ufaqs/036-timer-delay-error/) - https://youtu.be/6pNZEOwA-kI - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [036 - Timer Delay Error](https://www.balebandit.com/ufaqs/036-timer-delay-error-2/) - https://youtu.be/6pNZEOwA-kI - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [030 - Timer Delay Error](https://www.balebandit.com/ufaqs/030-timer-delay-error/) - https://youtu.be/ngqB7h2_Wxk - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [030 - Timer Delay Error](https://www.balebandit.com/ufaqs/030-timer-delay-error-2/) - https://youtu.be/ngqB7h2_Wxk - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [024 - Timer Delay Error](https://www.balebandit.com/ufaqs/024-timer-delay-error/) - https://youtu.be/rh8YHCvm4IA - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [024 - Timer Delay Error](https://www.balebandit.com/ufaqs/024-timer-delay-error-2/) - https://youtu.be/rh8YHCvm4IA - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [020 - Timer Delay Error](https://www.balebandit.com/ufaqs/020-timer-delay-error/) - https://youtu.be/xlL9QjO505g - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [020 - Timer Delay Error](https://www.balebandit.com/ufaqs/020-timer-delay-error-2/) - https://youtu.be/xlL9QjO505g - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [012 - Timer Delay Error](https://www.balebandit.com/ufaqs/012-timer-delay-error/) - https://youtu.be/hQZObbMu2zY - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [012 - Timer Delay Error](https://www.balebandit.com/ufaqs/012-timer-delay-error-2/) - https://youtu.be/hQZObbMu2zY - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [008 - Timer Delay Error](https://www.balebandit.com/ufaqs/008-timer-delay-error/) - https://youtu.be/8AudMpi5_R0 - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [008 - Timer Delay Error](https://www.balebandit.com/ufaqs/008-timer-delay-error-2/) - https://youtu.be/8AudMpi5_R0 - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [005 - Timer Delay Error](https://www.balebandit.com/ufaqs/005-timer-delay-error/) - https://youtu.be/qE016olSOPg - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [005 - Timer Delay Error](https://www.balebandit.com/ufaqs/005-timer-delay-error-2/) - https://youtu.be/qE016olSOPg - Disengage hydraulic power and unplug main power cord. Wait for approximately 10 seconds, plug back in and engage hydraulic power.
- [002 - Reset Strapping button is stuck on.](https://www.balebandit.com/ufaqs/002-reset-strapping-button-is-stuck-on-2/) - https://youtu.be/rrAng9-znr8 - Press Reset Strapping Button a few times to un-stick it. - Tap on the side of button. - Take Reset Strapping Button apart internally and clean out hay dust
- [002 - Reset Strapping button is stuck on.](https://www.balebandit.com/ufaqs/002-reset-strapping-button-is-stuck-on/) - https://youtu.be/rrAng9-znr8 - Press Reset Strapping Button a few times to un-stick it. - Tap on the side of button. - Take Reset Strapping Button apart internally and clean out hay dust
- [001 - Reset bundle button is stuck on](https://www.balebandit.com/ufaqs/001-reset-bundle-button-is-stuck-on/) - https://youtu.be/RnGt5GZ0x8Q - Press Reset Bundle Button a few times to un-stick it. - Tap on the side of button. - Take Reset Bundle Button apart internally and clean out hay dust
- [001 - Reset Bundle button is stuck on.](https://www.balebandit.com/ufaqs/001-reset-bundle-button-is-stuck-on-2/) - https://youtu.be/RnGt5GZ0x8Q - Press Reset Bundle Button a few times to un-stick it. - Tap on the side of button. - Take Reset Bundle Button apart internally and clean out hay dust
- [904 - Communication Delay](https://www.balebandit.com/ufaqs/904-communication-delay/) - https://youtu.be/giEHnsWN8Ms If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [093 - Communication from Band Computer](https://www.balebandit.com/ufaqs/093-communication-from-band-computer/) - https://youtu.be/wPrhFUKGHNo If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [093 - Communication from Band Computer](https://www.balebandit.com/ufaqs/093-communication-from-band-computer-2/) - https://youtu.be/wPrhFUKGHNo If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [091 - Communication from Band Computer](https://www.balebandit.com/ufaqs/091-communication-from-band-computer/) - https://youtu.be/2hc-dkzRu2Q If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [091 - Communication from Band Computer](https://www.balebandit.com/ufaqs/091-communication-from-band-computer-2/) - https://youtu.be/2hc-dkzRu2Q If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [086 - Communication from Band Computer](https://www.balebandit.com/ufaqs/086-communication-from-band-computer/) - https://youtu.be/jYcpA4vkPzY If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [086 - Communication from Band Computer](https://www.balebandit.com/ufaqs/086-communication-from-band-computer-2/) - https://youtu.be/jYcpA4vkPzY If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [083 - Communication from Band Computer](https://www.balebandit.com/ufaqs/083-communication-from-band-computer/) - https://youtu.be/39oub0-O01o If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [083 - Communication from Band Computer](https://www.balebandit.com/ufaqs/083-communication-from-band-computer-2/) - https://youtu.be/39oub0-O01o If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [082 - Communication from Band Computer](https://www.balebandit.com/ufaqs/082-communication-from-band-computer/) - https://youtu.be/3zW3xKLGH4M If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [082 - Communication from Band Computer](https://www.balebandit.com/ufaqs/082-communication-from-band-computer-2/) - https://youtu.be/3zW3xKLGH4M If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [081 - Communication from Band Computer](https://www.balebandit.com/ufaqs/081-communication-from-band-computer/) - https://youtu.be/x8r6A3ZiVlU If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [081 - Communication from Band Computer](https://www.balebandit.com/ufaqs/081-communication-from-band-computer-2/) - https://youtu.be/x8r6A3ZiVlU If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [080 - Communication from Band Computer](https://www.balebandit.com/ufaqs/080-communication-from-band-computer/) - https://youtu.be/OqgMnksvpYA If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [080 - Communication from Band Computer](https://www.balebandit.com/ufaqs/080-communication-from-band-computer-2/) - https://youtu.be/OqgMnksvpYA If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [079 - Communication from Band Computer](https://www.balebandit.com/ufaqs/079-communication-from-band-computer/) - https://youtu.be/p1nyawxLvbc If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [079 - Communication from Band Computer](https://www.balebandit.com/ufaqs/079-communication-from-band-computer-2/) - https://youtu.be/p1nyawxLvbc If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [078 - Communication from Band Computer](https://www.balebandit.com/ufaqs/078-communication-from-band-computer/) - https://youtu.be/48MQoebid5Y If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [078 - Communication from Band Computer](https://www.balebandit.com/ufaqs/078-communication-from-band-computer-2/) - https://youtu.be/48MQoebid5Y If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [076 - Communication from Band Computer](https://www.balebandit.com/ufaqs/076-communication-from-band-computer/) - https://youtu.be/GU7y1X5vUXY If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [076 - Communication from Band Computer](https://www.balebandit.com/ufaqs/076-communication-from-band-computer-2/) - https://youtu.be/GU7y1X5vUXY If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [075 - Communication from Band Computer](https://www.balebandit.com/ufaqs/075-communication-from-band-computer/) - https://youtu.be/IVG-NFHJ8I0 If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [075 - Communication from Band Computer](https://www.balebandit.com/ufaqs/075-communication-from-band-computer-2/) - https://youtu.be/IVG-NFHJ8I0 If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [071 - Communication from Band Computer](https://www.balebandit.com/ufaqs/071-communication-from-band-computer/) - https://youtu.be/i9Qs7CtIz_w https://youtu.be/i9Qs7CtIz_w If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the
- [071 - Communication from Band Computer](https://www.balebandit.com/ufaqs/071-communication-from-band-computer-2/) - https://youtu.be/i9Qs7CtIz_w If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [067 - Communication from Band Computer](https://www.balebandit.com/ufaqs/067-communication-from-band-computer/) - https://youtu.be/Ni-QGJ13DzM If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [067 - Communication from Band Computer](https://www.balebandit.com/ufaqs/067-communication-from-band-computer-2/) - https://youtu.be/Ni-QGJ13DzM If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [063 - Communication from Band Computer](https://www.balebandit.com/ufaqs/063-communication-from-band-computer/) - https://youtu.be/OuObYw6z3Gk If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [063 - Communication from Band Computer](https://www.balebandit.com/ufaqs/063-communication-from-band-computer-2/) - https://youtu.be/OuObYw6z3Gk If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [062 - Communication from Band Computer](https://www.balebandit.com/ufaqs/062-communication-from-band-computer/) - https://youtu.be/HK2Ry-JRY30 If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [062 - Communication from Band Computer](https://www.balebandit.com/ufaqs/062-communication-from-band-computer-2/) - https://youtu.be/HK2Ry-JRY30 If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [057 - Communication from Band Computer](https://www.balebandit.com/ufaqs/057-communication-from-band-computer/) - https://youtu.be/K43UUl0s7VI If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [057 - Communication from Band Computer](https://www.balebandit.com/ufaqs/057-communication-from-band-computer-2/) - https://youtu.be/K43UUl0s7VI If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [051 - Communication from Band Computer](https://www.balebandit.com/ufaqs/051-communication-from-band-computer/) - https://youtu.be/rCN9M0hyoZM If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [051 - Communication from Band Computer](https://www.balebandit.com/ufaqs/051-communication-from-band-computer-2/) - https://youtu.be/rCN9M0hyoZM If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [048 - Communication from Band Computer](https://www.balebandit.com/ufaqs/048-communication-from-band-computer/) - https://youtu.be/GkFACCLyNYA If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [048 - Communication from Band Computer](https://www.balebandit.com/ufaqs/048-communication-from-band-computer-2/) - https://youtu.be/GkFACCLyNYA If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [044 - Communication from Band Computer](https://www.balebandit.com/ufaqs/044-communication-from-band-computer/) - https://youtu.be/dWtoC9Jvciw If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [044 - Communication from Band Computer](https://www.balebandit.com/ufaqs/044-communication-from-band-computer-2/) - https://youtu.be/dWtoC9Jvciw If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [043 - Communication from Band Computer](https://www.balebandit.com/ufaqs/043-communication-from-band-computer/) - https://youtu.be/xsUObRkQr1c If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [043 - Communication from Band Computer](https://www.balebandit.com/ufaqs/043-communication-from-band-computer-2/) - https://youtu.be/xsUObRkQr1c If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [039 - Communication from Band Computer](https://www.balebandit.com/ufaqs/039-communication-from-band-computer/) - https://youtu.be/jhLi2VJYIXQ If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [039 - Communication from Band Computer](https://www.balebandit.com/ufaqs/039-communication-from-band-computer-2/) - https://youtu.be/jhLi2VJYIXQ If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [037 - Communication from Band Computer](https://www.balebandit.com/ufaqs/037-communication-from-band-computer/) - https://youtu.be/_3Gxtqmrm48 If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [037 - Communication from Band Computer](https://www.balebandit.com/ufaqs/037-communication-from-band-computer-2/) - https://youtu.be/_3Gxtqmrm48 If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [029 - Communication from Band Computer](https://www.balebandit.com/ufaqs/029-communication-from-band-computer/) - https://youtu.be/cvdACcojs9I If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [029 - Communication from Band Computer](https://www.balebandit.com/ufaqs/029-communication-from-band-computer-2/) - https://youtu.be/cvdACcojs9I If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [025 - Communication from Band Computer](https://www.balebandit.com/ufaqs/025-communication-from-band-computer/) - https://youtu.be/pOYMm1LMzRw If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the voltage
- [025 - Communication from Band Computer](https://www.balebandit.com/ufaqs/025-communication-from-band-computer-2/) - https://youtu.be/pOYMm1LMzRw If the iPad or monitor says there has been a communication delay: Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power If that does not change the operation code, then turn the hydraulic power off and check the
- [904 - Communication Delay](https://www.balebandit.com/ufaqs/904-communication-delay-2/) - https://youtu.be/giEHnsWN8Ms If the iPad or monitor says there has been a communication delay: 1. Disengage the hydraulic power and unplug the power cord. Wait approximately 10 seconds and then plug it back in and reengage the hydraulic power 2. If that does not change the operation code, then turn the hydraulic power off and
- [903 - Banding Cycle, Leave Hydraulics On!](https://www.balebandit.com/ufaqs/903-banding-cycle-leave-hydraulics-on-2/) - - Bale Band-It is compressing and tying the bundle. If hydraulics is removed during this time the bundle may or may not be strapped properly. If at all possible leave hydraulic power on to the machine unless an emergency or machine failure.
- [902 - Back Floor Unloading](https://www.balebandit.com/ufaqs/902-back-floor-unloading-2/) - - Not an error code, just informative that the Back Floor is unloading the bundle. This occurs on Bale 12 of each bundle.
- [901 - Rebooting……](https://www.balebandit.com/ufaqs/901-rebooting-2/) - - Bale Band-It is rebooting, please wait.
- [900 - Resetting……](https://www.balebandit.com/ufaqs/900-resetting-2/) - - Bale Band-It is resetting, please wait.
- [400 - Photo 3 Ready, Waiting for the Bale](https://www.balebandit.com/ufaqs/400-photo-3-ready-waiting-for-the-bale-2/) - - The machine is waiting for the elevator to move the bale at Photo 2 to Photo 3. - If this message is shown and there is no bale at Photo 2 to move to Photo 3, then the lens on Photo 2 needs to be cleaned. If the lens of Photo 2 is partially
- [300 - Photo 3 Error, Unplug power and clean Photo 3](https://www.balebandit.com/ufaqs/300-photo-3-error-unplug-power-and-clean-photo-3-2/) - - The machine has stored the bale at Photo 2 and is waiting for Photo 3 sensor to be ‘off’. Photo 3 is ‘off’ when a bale or foreign object is blocking the view of the photo sensor. Occasionally, chaff or dust can cause this error to occur. Disconnect the main electrical and hydraulic power.
- [200  - Photo 2 Ready, Waiting for the Bale](https://www.balebandit.com/ufaqs/200-photo-2-ready-waiting-for-the-bale-2/) - - The machine is waiting for the elevator to move the bale at Photo 1 to Photo 2. - If Photo 1 was tripped prematurely this will be displayed until a bale enters the machine and trips Photo 2. The horizontal & vertical elevator will both be running but nothing needs to be done to
- [100 - Photo 1 Ready, Waiting for a Bale](https://www.balebandit.com/ufaqs/100-photo-1-ready-waiting-for-a-bale-2/) - - The machine is waiting for the baler to place a bale at Photo 1 located at the mouth of the elevator. Elevator will have the following state: - Horizontal and Vertical elevator will be off.
- [099 - Out of Strapping](https://www.balebandit.com/ufaqs/099-out-of-strapping-2/) - - The computer’s bundle count has reached 0 bundles left on the current 2 rolls of strapping. In order for the machine to continue operating the Reset Banding button needs to be pressed, which is located in the Banding box. By pressing the Reset Banding button, the computer then thinks that 2 new rolls of
- [097 - Bale Position 3 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/097-bale-position-3-sensor-bar-switch-stuck-on-2/) - Note: Before the machine will lower the Strap Guide Arms, it does a safety check on the Bale Position 3 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [096 - Bale Position 2 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/096-bale-position-2-sensor-bar-switch-stuck-on-2/) - Note: Before the machine will lower the Strap Guide Arms, it does a safety check on the Bale Position 2 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [095 - Bale Position 1 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/095-bale-position-1-sensor-bar-switch-stuck-on-2/) - Note: Before the machine will lower the Strap Guide Arms, it does a safety check on the Bale Position 1 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [094 - Bale Position 0 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/094-bale-position-0-sensor-bar-switch-stuck-on-2/) - Note: Before the machine will raise the Strap Guide Arms, it does a safety check on the Bale Position 0 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [092 - Waiting for Strap Guides to be at top position.](https://www.balebandit.com/ufaqs/092-waiting-for-strap-guides-to-be-at-top-position-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar switch. The switch is located upper
- [090 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/090-waiting-for-horizontal-plunger-reed-switch-to-be-on-2/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has extended the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with the Horizontal Plunger magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully
- [089 - Waiting for Kicker reed switch to be on.](https://www.balebandit.com/ufaqs/089-waiting-for-kicker-reed-switch-to-be-on-2/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has retracted the Kicker cylinder, the Kicker reed switch should be lined up with the Kicker magnet located in the round plastic, which turns the switch on. This is what the machine is waiting for. If the Kicker cylinder is
- [088 - Waiting for Right Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/088-waiting-for-right-fetcher-in-reed-switch-to-be-on-2/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has retracted the Right/Left Fetcher cylinder, the Right Fetcher In reed switch should be lined up with the Right Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher cylinder is
- [087 - Waiting for Left Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/087-waiting-for-left-fetcher-in-reed-switch-to-be-on-2/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has retracted the Right/Left Fetcher cylinder, the Left Fetcher In reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher cylinder is
- [085 - Waiting for Right Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/085-waiting-for-right-fetcher-out-reed-switch-to-be-on-2/) - Note: This code occurs when the Reset Bundle button was pressed while the Fetcher cylinders were extended or partially extended. In order to properly reset, the machine will fully extend the Fetcher cylinders (unless they are already extended). The machine will then wait until the Right Fetcher magnet is in front of the Right Fetcher
- [084 - Waiting for Left Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/084-waiting-for-left-fetcher-out-reed-switch-to-be-on-2/) - Note: This code occurs when the Reset Bundle button was pressed while the Fetcher cylinders were extended or partially extended. In order to properly reset, the machine will fully extend the Fetcher cylinders (unless they are already extended). The machine will then wait until the Left Fetcher magnet is in front of the Left Fetcher
- [073 - Waiting for Right Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/073-waiting-for-right-band-out-reed-switch-to-be-on-2/) - Note: After the machine has raised the Right/Left Bander cylinders, the Right Band Out reed switch should be lined up with the Right Band magnet, which turns the switch on. This is what the machine is waiting for. If the Right Bander cylinder is fully extended, - Check the air gap distance between the Right
- [072 - Waiting for Left Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/072-waiting-for-left-band-out-reed-switch-to-be-on-2/) - Note: After the machine has raised the Right/Left Bander cylinders, the Left Band Out reed switch should be lined up with the Left Band magnet, which turns the switch on. This is what the machine is waiting for. If the Left Bander cylinder is fully extended, - Check the air gap distance between the Left
- [069 - Waiting for Right Band Out reed switch to be off.](https://www.balebandit.com/ufaqs/069-waiting-for-right-band-out-reed-switch-to-be-off-2/) - Note: After the machine lowers the Right/Left Bander cylinders it checks to see if they are down by making sure that the Right Band Out reed switch is off. When the Bander cylinders go down it moves the Bander magnets down with it. This removes the magnet away from the Right Band Out reed switch,
- [068 - Waiting for Left Band Out reed switch to be off.](https://www.balebandit.com/ufaqs/068-waiting-for-left-band-out-reed-switch-to-be-off-2/) - Note: After the machine lowers the Right/Left Bander cylinders it checks to see if they are down by making sure that the Left Band Out reed switch is off. When the Bander cylinders go down it moves the Bander magnets down with it. This removes the magnet away from the Left Band Out reed switch,
- [Sensor Bar](https://www.balebandit.com/ufaqs/sensor-bar/) - https://youtu.be/WXXNT4dDPwc
- [Photo Eyes Overview](https://www.balebandit.com/ufaqs/photo-eyes-overview/) - https://youtu.be/VzQ-vvHDM58
- [Photo Eye Adjustments](https://www.balebandit.com/ufaqs/photo-eyes/)
- [065 - Waiting for Right Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/065-waiting-for-right-band-out-reed-switch-to-be-on-2/) - Note: After the machine has extended the Right/Left Full Band cylinders, the Right Band Out reed switch should be lined up with the Right Band magnet, which turns the switch on. This is what the machine is waiting for. If the Right Band Full cylinder is fully extended, - Check the air gap distance between
- [064 - Waiting for Left Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/064-waiting-for-left-band-out-reed-switch-to-be-on-2/) - Note: After the machine has extended the Right/Left Full Band cylinders, the Left Band Out reed switch should be lined up with the Left Band magnet, which turns the switch on. This is what the machine is waiting for. If the Left Band Full cylinder is fully extended, - Check the air gap distance between
- [059 - Waiting for Right Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/059-waiting-for-right-fetcher-in-reed-switch-to-be-on-2/) - Note: After the machine has retracted the Right/Left Fetcher cylinder, the Right Fetcher In reed switch should be lined up with the Right Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher cylinder is fully retracted, - Check the air gap distance between the Right
- [058 - Waiting for Left Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/058-waiting-for-left-fetcher-in-reed-switch-to-be-on-2/) - Note: After the machine has retracted the Right/Left Fetcher cylinder, the Left Fetcher In reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher cylinder is fully retracted, - Check the air gap distance between the Left
- [056 - Right Fetcher In reed switch is stuck on.](https://www.balebandit.com/ufaqs/056-right-fetcher-in-reed-switch-is-stuck-on-2/) - Note: Before the machine retracts the Right/Left Fetcher cylinders it does a safety check on the Right Fetcher In reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Right Fetcher In
- [055 - Left Fetcher In reed switch is stuck on.](https://www.balebandit.com/ufaqs/055-left-fetcher-in-reed-switch-is-stuck-on-2/) - Note: Before the machine retracts the Right/Left Fetcher cylinders it does a safety check on the Left Fetcher In reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Left Fetcher In
- [053 - Waiting for Right Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/053-waiting-for-right-fetcher-out-reed-switch-to-be-on-2/) - Note: After the machine has retracted the Right/Left Fetcher Swing cylinders, the Right Fetcher Out reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher Swing cylinder is fully retracted, - Check the air gap distance between
- [052 - Waiting for Left Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/052-waiting-for-left-fetcher-out-reed-switch-to-be-on-2/) - Note: After the machine has retracted the Right/Left Fetcher Swing cylinders, the Left Fetcher Out reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher Swing cylinder is fully retracted, - Check the air gap distance between
- [050 - Waiting for Right Fetcher Out reed switch to be off.](https://www.balebandit.com/ufaqs/050-waiting-for-right-fetcher-out-reed-switch-to-be-off-2/) - Note: The machine has extended the Right/Left Fetcher Swing cylinders. When they are extended it rotates the Right Fetcher magnet away from the Right Fetcher Out reed switch, which turns the switch off. This is what the machine is waiting for. If the Right Fetcher Swing cylinder is fully extended, - Loosen nuts on Right
- [049 - Waiting for Left Fetcher Out reed switch to be off.](https://www.balebandit.com/ufaqs/049-waiting-for-left-fetcher-out-reed-switch-to-be-off-2/) - Note: The machine has extended the Right/Left Fetcher Swing cylinders. When they are extended it rotates the Left Fetcher magnet away from the Left Fetcher Out reed switch, which turns the switch off. This is what the machine is waiting for. If the Left Fetcher Swing cylinder is fully extended, - Loosen nuts on Left
- [046 - Waiting for Right Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/046-waiting-for-right-fetcher-out-reed-switch-to-be-on-2/) - Note: After the machine has extended the Right/Left Fetcher cylinder, the Right Fetcher Out reed switch should be lined up with the Right Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher cylinder is fully extended, - Check the air gap distance between the Right
- [045 - Waiting for Left Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/045-waiting-for-left-fetcher-out-reed-switch-to-be-on-2/) - Note: After the machine has extended the Right/Left Fetcher cylinder, the Left Fetcher Out reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher cylinder is fully extended, - Check the air gap distance between the Left
- [041 - Right Fetcher Out reed switch is stuck on.](https://www.balebandit.com/ufaqs/041-right-fetcher-out-reed-switch-is-stuck-on-2/) - Note: Before the machine extends the Right/Left Fetcher cylinders it does a safety check on the Right Fetcher Out reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Right Fetcher Out
- [040 - Left Fetcher Out reed switch is stuck on.](https://www.balebandit.com/ufaqs/040-left-fetcher-out-reed-switch-is-stuck-on-2/) - Note: Before the machine extends the Right/Left Fetcher cylinders it does a safety check on the Left Fetcher Out reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Left Fetcher Out
- [035 - Right Band Full reed switch is stuck on.](https://www.balebandit.com/ufaqs/035-right-band-full-reed-switch-is-stuck-on-2/) - Note: Before the machine extends the Right/Left Mid Banding Position cylinders it does a safety check on the Right Band Full reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Right
- [034 - Left Band Full reed switch is stuck on.](https://www.balebandit.com/ufaqs/034-left-band-full-reed-switch-is-stuck-on-2/) - Note: Before the machine extends the Right/Left Mid Banding Position cylinders it does a safety check on the Left Band Full reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Left
- [033 - Waiting for Vertical Plunger Up sensor bar switch to be on.](https://www.balebandit.com/ufaqs/033-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-on-2/) - Note: This code occurs when the Reset Bundle button has been pressed. The machine begins its reset mode. In order to properly reset the machine it retracts the Vertical Plunger cylinder (unless it is already retracted) and waits for the Vertical Plunger magnet to be in front of the Vertical Plunger Up sensor bar switch.
- [032 - Waiting for Vertical Plunger Up sensor bar switch to be off.](https://www.balebandit.com/ufaqs/032-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-off-2/) - Note: After the machine has extended the Vertical Plunger Swing cylinder, the Vertical Plunger magnet should be moved away from the Vertical Plunger Up sensor bar switch, which turns the switch off. This is what the machine is waiting for. The switch is located at the top of the sensor bar at the white mark.
- [031 - Waiting for Strap Guides to be at top position.](https://www.balebandit.com/ufaqs/031-waiting-for-strap-guides-to-be-at-top-position-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar. The switch is located upper mid
- [028 - Waiting for Strap Guides to be at top position](https://www.balebandit.com/ufaqs/028-waiting-for-strap-guides-to-be-at-top-position-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar. The switch is located upper mid
- [027 - Waiting for Strap Guides to be at top position.](https://www.balebandit.com/ufaqs/027-waiting-for-strap-guides-to-be-at-top-position-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar switch. The switch is located upper
- [026 - Bale Position 0 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/026-bale-position-0-sensor-bar-switch-stuck-on-2/) - Note: Before the machine raises the Strap Guide Arms it does a safety check on the Bale Position 0 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is located
- [023 - Waiting for Vertical Plunger Up sensor bar switch to be on. .](https://www.balebandit.com/ufaqs/023-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-on-2/) - Note: After the machine has extended the Vertical Plunger cylinder, the Vertical Plunger Up magnet should be lined up with the Vertical Plunger sensor bar switch, which turns the switch on. This is what the machine is waiting for. The switch is located at the top of the sensor bar at the white mark. If
- [022 - Vertical Plunger Up sensor bar switch is stuck on.](https://www.balebandit.com/ufaqs/022-vertical-plunger-up-sensor-bar-switch-is-stuck-on-2/) - Note: Before the machine extends the Vertical Plunger cylinder it does a safety check on the Vertical Plunger Up sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is located
- [021 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/021-waiting-for-horizontal-plunger-reed-switch-to-be-on-2/) - Note: After the machine has extended the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with a set of magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully extended, - Check the air gap distance between the Horizontal Plunger
- [019 - Waiting for Horizontal Plunger reed switch to be off.](https://www.balebandit.com/ufaqs/019-waiting-for-horizontal-plunger-reed-switch-to-be-off-2/) - Note: Before the machine extends the Horizontal Plunger cylinder, the Horizontal Plunger reed switch is in front of the first set of magnets. When the machine extends the Horizontal Plunger cylinder it moves the first magnet away from the switch, which turns the Horizontal Plunger reed switch off. This is what the machine is waiting
- [018 - Waiting for Kicker reed switch to be off.](https://www.balebandit.com/ufaqs/018-waiting-for-kicker-reed-switch-to-be-off-2/) - Note: Before the machine retracts the Kicker cylinder, the Kicker reed switch is in front of the first magnet mounted in the round plastic. When the machine retracts the Kicker cylinder it rotates the round plastic, moving the first magnet away from the switch, which turns the Kicker reed switch off. This is what the
- [017 - Waiting for Vertical Plunger Down sensor bar switch to be on.](https://www.balebandit.com/ufaqs/017-waiting-for-vertical-plunger-down-sensor-bar-switch-to-be-on-2/) - Note: After the machine has retracted the Vertical Plunger cylinder, the Vertical Plunger Down magnet should be lined up with the Vertical Plunger sensor bar switch, which turns the switch on. This is what the machine is waiting for. The switch is located mid way of the sensor bar at the red mark. If the
- [015 - Waiting for Strap Guide Arms at Bale Position 3.](https://www.balebandit.com/ufaqs/015-waiting-for-strap-guide-arms-at-bale-position-3-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them down. When the Strap Guide Arms magnet reaches the Bale Position 3 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 3 sensor bar switch. The switch is located near
- [014 - Waiting for Strap Guide Arms at Bale Position 2.](https://www.balebandit.com/ufaqs/014-waiting-for-strap-guide-arms-at-bale-position-2-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them down. When the Strap Guide Arms magnet reaches the Bale Position 2 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 2 sensor bar switch. The switch is located mid
- [013 - Waiting for Strap Guide Arms at Bale Position 1.](https://www.balebandit.com/ufaqs/013-waiting-for-strap-guide-arms-at-bale-position-1-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them down. When the Strap Guide Arms magnet reaches the Bale Position 1 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 1 sensor bar switch. The switch is located mid
- [011 - Waiting for Vertical Plunger Up sensor bar switch to be on.](https://www.balebandit.com/ufaqs/011-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-on-2/) - Note: After the machine has retracted the Vertical Plunger Swing cylinder, the Vertical Plunger Up magnet should be lined up with the Vertical Plunger sensor bar switch, which turns the switch on. This is what the machine is waiting for. The switch is located at the top of the sensor bar at the white mark.
- [010 - Vertical Plunger Up sensor bar switch is stuck on.](https://www.balebandit.com/ufaqs/010-vertical-plunger-up-sensor-bar-switch-is-stuck-on-2/) - Note: Before the machine retracts the Vertical Plunger Swing cylinder it does a safety check on the Vertical Plunger Up sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [009 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/009-waiting-for-horizontal-plunger-reed-switch-to-be-on-2/) - Note: After the machine has retracted the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with a set of magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully retracted, - Check the air gap distance between the Horizontal Plunger
- [007 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/007-waiting-for-horizontal-plunger-reed-switch-to-be-on-2/) - Note: After the machine has retracted the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with a set of magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully retracted, - Check the air gap distance between the Horizontal Plunger
- [006 - Waiting for Horizontal Plunger reed switch to be off.](https://www.balebandit.com/ufaqs/006-waiting-for-horizontal-plunger-reed-switch-to-be-off-2/) - Note: Before the machine retracts the Horizontal Plunger cylinder, the Horizontal Plunger reed switch is in front of the first set of magnets. When the machine retracts the Horizontal Plunger cylinder it moves the first magnet away from the switch, which turns the Horizontal Plunger reed switch off. This is what the machine is waiting
- [022 - Vertical Plunger Up sensor bar switch is stuck on.](https://www.balebandit.com/ufaqs/022-vertical-plunger-up-sensor-bar-switch-is-stuck-on/) - Note: Before the machine extends the Vertical Plunger cylinder it does a safety check on the Vertical Plunger Up sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is located
- [903 - Banding Cycle, Leave Hydraulics On!](https://www.balebandit.com/ufaqs/903-banding-cycle-leave-hydraulics-on/) - - Bale Band-It is compressing and tying the bundle. If hydraulics is removed during this time the bundle may or may not be strapped properly. If at all possible leave hydraulic power on to the machine unless an emergency or machine failure.
- [902 - Back Floor Unloading](https://www.balebandit.com/ufaqs/902-back-floor-unloading/) - - Not an error code, just informative that the Back Floor is unloading the bundle. This occurs on Bale 12 of each bundle.
- [901 - Rebooting……](https://www.balebandit.com/ufaqs/901-rebooting/) - - Bale Band-It is rebooting, please wait.
- [900 - Resetting……](https://www.balebandit.com/ufaqs/900-resetting/) - - Bale Band-It is resetting, please wait.
- [400 - Photo 3 Ready, Waiting for the Bale](https://www.balebandit.com/ufaqs/400-photo-3-ready-waiting-for-the-bale/) - - The machine is waiting for the elevator to move the bale at Photo 2 to Photo 3. - If this message is shown and there is no bale at Photo 2 to move to Photo 3, then the lens on Photo 2 needs to be cleaned. If the lens of Photo 2 is partially
- [300 - Photo 3 Error, Unplug power and clean Photo 3](https://www.balebandit.com/ufaqs/300-photo-3-error-unplug-power-and-clean-photo-3/) - - The machine has stored the bale at Photo 2 and is waiting for Photo 3 sensor to be ‘off’. Photo 3 is ‘off’ when a bale or foreign object is blocking the view of the photo sensor. Occasionally, chaff or dust can cause this error to occur. Disconnect the main electrical and hydraulic power.
- [200  - Photo 2 Ready, Waiting for the Bale](https://www.balebandit.com/ufaqs/200-photo-2-ready-waiting-for-the-bale/) - - The machine is waiting for the elevator to move the bale at Photo 1 to Photo 2. - If Photo 1 was tripped prematurely this will be displayed until a bale enters the machine and trips Photo 2. The horizontal & vertical elevator will both be running but nothing needs to be done to
- [100 - Photo 1 Ready, Waiting for a Bale](https://www.balebandit.com/ufaqs/100-photo-1-ready-waiting-for-a-bale/) - - The machine is waiting for the baler to place a bale at Photo 1 located at the mouth of the elevator. -Elevator will have the following state: - Horizontal and Vertical elevator will be off.
- [099 - Out of Strapping](https://www.balebandit.com/ufaqs/099-out-of-strapping/) - - The computer’s bundle count has reached 0 bundles left on the current 2 rolls of strapping. In order for the machine to continue operating the Reset Banding button needs to be pressed, which is located in the Banding box. By pressing the Reset Banding button, the computer then thinks that 2 new rolls of
- [097 - Bale Position 3 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/097-bale-position-3-sensor-bar-switch-stuck-on/) - Note: Before the machine will lower the Strap Guide Arms, it does a safety check on the Bale Position 3 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [096 - Bale Position 2 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/096-bale-position-2-sensor-bar-switch-stuck-on/) - Note: Before the machine will lower the Strap Guide Arms, it does a safety check on the Bale Position 2 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [095 - Bale Position 1 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/095-bale-position-1-sensor-bar-switch-stuck-on/) - Note: Before the machine will lower the Strap Guide Arms, it does a safety check on the Bale Position 1 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [094 - Bale Position 0 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/094-bale-position-0-sensor-bar-switch-stuck-on/) - Note: Before the machine will raise the Strap Guide Arms, it does a safety check on the Bale Position 0 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [092 - Waiting for Strap Guides to be at top position.](https://www.balebandit.com/ufaqs/092-waiting-for-strap-guides-to-be-at-top-position/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar switch. The switch is located upper
- [090 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/090-waiting-for-horizontal-plunger-reed-switch-to-be-on/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has extended the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with the Horizontal Plunger magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully
- [089 - Waiting for Kicker reed switch to be on.](https://www.balebandit.com/ufaqs/089-waiting-for-kicker-reed-switch-to-be-on/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has retracted the Kicker cylinder, the Kicker reed switch should be lined up with the Kicker magnet located in the round plastic, which turns the switch on. This is what the machine is waiting for. If the Kicker cylinder is
- [088 - Waiting for Right Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/088-waiting-for-right-fetcher-in-reed-switch-to-be-on/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has retracted the Right/Left Fetcher cylinder, the Right Fetcher In reed switch should be lined up with the Right Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher cylinder is
- [087 - Waiting for Left Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/087-waiting-for-left-fetcher-in-reed-switch-to-be-on/) - Note: This code occurs after the Reset Bundle button has been pressed. After the machine has retracted the Right/Left Fetcher cylinder, the Left Fetcher In reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher cylinder is
- [085 - Waiting for Right Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/085-waiting-for-right-fetcher-out-reed-switch-to-be-on/) - Note: This code occurs when the Reset Bundle button was pressed while the Fetcher cylinders were extended or partially extended. In order to properly reset, the machine will fully extend the Fetcher cylinders (unless they are already extended). The machine will then wait until the Right Fetcher magnet is in front of the Right Fetcher
- [084 - Waiting for Left Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/084-waiting-for-left-fetcher-out-reed-switch-to-be-on/) - Note: This code occurs when the Reset Bundle button was pressed while the Fetcher cylinders were extended or partially extended. In order to properly reset, the machine will fully extend the Fetcher cylinders (unless they are already extended). The machine will then wait until the Left Fetcher magnet is in front of the Left Fetcher
- [073 - Waiting for Right Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/073-waiting-for-right-band-out-reed-switch-to-be-on/) - Note: After the machine has raised the Right/Left Bander cylinders, the Right Band Out reed switch should be lined up with the Right Band magnet, which turns the switch on. This is what the machine is waiting for. If the Right Bander cylinder is fully extended, - Check the air gap distance between the Right
- [072 - Waiting for Left Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/072-waiting-for-left-band-out-reed-switch-to-be-on/) - Note: After the machine has raised the Right/Left Bander cylinders, the Left Band Out reed switch should be lined up with the Left Band magnet, which turns the switch on. This is what the machine is waiting for. If the Left Bander cylinder is fully extended, - Check the air gap distance between the Left
- [069 - Waiting for Right Band Out reed switch to be off.](https://www.balebandit.com/ufaqs/069-waiting-for-right-band-out-reed-switch-to-be-off/) - Note: After the machine lowers the Right/Left Bander cylinders it checks to see if they are down by making sure that the Right Band Out reed switch is off. When the Bander cylinders go down it moves the Bander magnets down with it. This removes the magnet away from the Right Band Out reed switch,
- [068 - Waiting for Left Band Out reed switch to be off.](https://www.balebandit.com/ufaqs/068-waiting-for-left-band-out-reed-switch-to-be-off/) - Note: After the machine lowers the Right/Left Bander cylinders it checks to see if they are down by making sure that the Left Band Out reed switch is off. When the Bander cylinders go down it moves the Bander magnets down with it. This removes the magnet away from the Left Band Out reed switch,
- [065 - Waiting for Right Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/065-waiting-for-right-band-out-reed-switch-to-be-on/) - Note: After the machine has extended the Right/Left Full Band cylinders, the Right Band Out reed switch should be lined up with the Right Band magnet, which turns the switch on. This is what the machine is waiting for. If the Right Band Full cylinder is fully extended, - Check the air gap distance between
- [064 - Waiting for Left Band Out reed switch to be on.](https://www.balebandit.com/ufaqs/064-waiting-for-left-band-out-reed-switch-to-be-on/) - Note: After the machine has extended the Right/Left Full Band cylinders, the Left Band Out reed switch should be lined up with the Left Band magnet, which turns the switch on. This is what the machine is waiting for. If the Left Band Full cylinder is fully extended, - Check the air gap distance between
- [059 - Waiting for Right Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/059-waiting-for-right-fetcher-in-reed-switch-to-be-on/) - Note: After the machine has retracted the Right/Left Fetcher cylinder, the Right Fetcher In reed switch should be lined up with the Right Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher cylinder is fully retracted, - Check the air gap distance between the Right
- [058 - Waiting for Left Fetcher In reed switch to be on.](https://www.balebandit.com/ufaqs/058-waiting-for-left-fetcher-in-reed-switch-to-be-on/) - Note: After the machine has retracted the Right/Left Fetcher cylinder, the Left Fetcher In reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher cylinder is fully retracted, - Check the air gap distance between the Left
- [056 - Right Fetcher In reed switch is stuck on.](https://www.balebandit.com/ufaqs/056-right-fetcher-in-reed-switch-is-stuck-on/) - Note: Before the machine retracts the Right/Left Fetcher cylinders it does a safety check on the Right Fetcher In reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Right Fetcher In
- [055 - Left Fetcher In reed switch is stuck on.](https://www.balebandit.com/ufaqs/055-left-fetcher-in-reed-switch-is-stuck-on/) - Note: Before the machine retracts the Right/Left Fetcher cylinders it does a safety check on the Left Fetcher In reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Left Fetcher In
- [053 - Waiting for Right Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/053-waiting-for-right-fetcher-out-reed-switch-to-be-on/) - Note: After the machine has retracted the Right/Left Fetcher Swing cylinders, the Right Fetcher Out reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher Swing cylinder is fully retracted, - Check the air gap distance between
- [052 - Waiting for Left Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/052-waiting-for-left-fetcher-out-reed-switch-to-be-on/) - Note: After the machine has retracted the Right/Left Fetcher Swing cylinders, the Left Fetcher Out reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher Swing cylinder is fully retracted, - Check the air gap distance between
- [050 - Waiting for Right Fetcher Out reed switch to be off.](https://www.balebandit.com/ufaqs/050-waiting-for-right-fetcher-out-reed-switch-to-be-off/) - Note: The machine has extended the Right/Left Fetcher Swing cylinders. When they are extended it rotates the Right Fetcher magnet away from the Right Fetcher Out reed switch, which turns the switch off. This is what the machine is waiting for. If the Right Fetcher Swing cylinder is fully extended, - Loosen nuts on Right
- [049 - Waiting for Left Fetcher Out reed switch to be off.](https://www.balebandit.com/ufaqs/049-waiting-for-left-fetcher-out-reed-switch-to-be-off/) - Note: The machine has extended the Right/Left Fetcher Swing cylinders. When they are extended it rotates the Left Fetcher magnet away from the Left Fetcher Out reed switch, which turns the switch off. This is what the machine is waiting for. If the Left Fetcher Swing cylinder is fully extended, - Loosen nuts on Left
- [046 - Waiting for Right Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/046-waiting-for-right-fetcher-out-reed-switch-to-be-on/) - Note: After the machine has extended the Right/Left Fetcher cylinder, the Right Fetcher Out reed switch should be lined up with the Right Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Right Fetcher cylinder is fully extended, - Check the air gap distance between the Right
- [045 - Waiting for Left Fetcher Out reed switch to be on.](https://www.balebandit.com/ufaqs/045-waiting-for-left-fetcher-out-reed-switch-to-be-on/) - Note: After the machine has extended the Right/Left Fetcher cylinder, the Left Fetcher Out reed switch should be lined up with the Left Fetcher magnet, which turns the switch on. This is what the machine is waiting for. If the Left Fetcher cylinder is fully extended, - Check the air gap distance between the Left
- [041 - Right Fetcher Out reed switch is stuck on.](https://www.balebandit.com/ufaqs/041-right-fetcher-out-reed-switch-is-stuck-on/) - Note: Before the machine extends the Right/Left Fetcher cylinders it does a safety check on the Right Fetcher Out reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Right Fetcher Out
- [040 - Left Fetcher Out reed switch is stuck on.](https://www.balebandit.com/ufaqs/040-left-fetcher-out-reed-switch-is-stuck-on/) - Note: Before the machine extends the Right/Left Fetcher cylinders it does a safety check on the Left Fetcher Out reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Left Fetcher Out
- [035 - Right Band Full reed switch is stuck on.](https://www.balebandit.com/ufaqs/035-right-band-full-reed-switch-is-stuck-on/) - Note: Before the machine extends the Right/Left Mid Banding Position cylinders it does a safety check on the Right Band Full reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Right
- [034 - Left Band Full reed switch is stuck on.](https://www.balebandit.com/ufaqs/034-left-band-full-reed-switch-is-stuck-on/) - Note: Before the machine extends the Right/Left Mid Banding Position cylinders it does a safety check on the Left Band Full reed switch. It checks to see if the reed switch is stuck on. If it is, it will wait until the reed switch is off before continuing the operation. - Loosen nuts on Left
- [033 - Waiting for Vertical Plunger Up sensor bar switch to be on.](https://www.balebandit.com/ufaqs/033-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-on/) - Note: This code occurs when the Reset Bundle button has been pressed. The machine begins its reset mode. In order to properly reset the machine it retracts the Vertical Plunger cylinder (unless it is already retracted) and waits for the Vertical Plunger magnet to be in front of the Vertical Plunger Up sensor bar switch.
- [032 - Waiting for Vertical Plunger Up sensor bar switch to be off.](https://www.balebandit.com/ufaqs/032-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-off/) - Note: After the machine has extended the Vertical Plunger Swing cylinder, the Vertical Plunger magnet should be moved away from the Vertical Plunger Up sensor bar switch, which turns the switch off. This is what the machine is waiting for. The switch is located at the top of the sensor bar at the white mark.
- [031 - Waiting for Strap Guides to be at top position.](https://www.balebandit.com/ufaqs/031-waiting-for-strap-guides-to-be-at-top-position/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar. The switch is located upper mid
- [028 - Waiting for Strap Guides to be at top position](https://www.balebandit.com/ufaqs/028-waiting-for-strap-guides-to-be-at-top-position/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar. The switch is located upper mid
- [027 - Waiting for Strap Guides to be at top position.](https://www.balebandit.com/ufaqs/027-waiting-for-strap-guides-to-be-at-top-position/) - Note: The machine has turned on the Strap Guide Arms motor and sent them up. When the Strap Guide Arms magnet reaches the Bale Position 0 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 0 sensor bar switch. The switch is located upper
- [026 - Bale Position 0 sensor bar switch stuck on.](https://www.balebandit.com/ufaqs/026-bale-position-0-sensor-bar-switch-stuck-on/) - Note: Before the machine raises the Strap Guide Arms it does a safety check on the Bale Position 0 sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is located
- [023 - Waiting for Vertical Plunger Up sensor bar switch to be on.](https://www.balebandit.com/ufaqs/023-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-on/) - Note: After the machine has extended the Vertical Plunger cylinder, the Vertical Plunger Up magnet should be lined up with the Vertical Plunger sensor bar switch, which turns the switch on. This is what the machine is waiting for. The switch is located at the top of the sensor bar at the white mark. If
- [021 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/021-waiting-for-horizontal-plunger-reed-switch-to-be-on/) - Note: After the machine has extended the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with a set of magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully extended, - Check the air gap distance between the Horizontal Plunger
- [019 - Waiting for Horizontal Plunger reed switch to be off.](https://www.balebandit.com/ufaqs/019-waiting-for-horizontal-plunger-reed-switch-to-be-off/) - Note: Before the machine extends the Horizontal Plunger cylinder, the Horizontal Plunger reed switch is in front of the first set of magnets. When the machine extends the Horizontal Plunger cylinder it moves the first magnet away from the switch, which turns the Horizontal Plunger reed switch off. This is what the machine is waiting
- [018 - Waiting for Kicker reed switch to be off.](https://www.balebandit.com/ufaqs/018-waiting-for-kicker-reed-switch-to-be-off/) - Note: Before the machine retracts the Kicker cylinder, the Kicker reed switch is in front of the first magnet mounted in the round plastic. When the machine retracts the Kicker cylinder it rotates the round plastic, moving the first magnet away from the switch, which turns the Kicker reed switch off. This is what the
- [017 - Waiting for Vertical Plunger Down sensor bar switch to be on.](https://www.balebandit.com/ufaqs/017-waiting-for-vertical-plunger-down-sensor-bar-switch-to-be-on/) - Note: After the machine has retracted the Vertical Plunger cylinder, the Vertical Plunger Down magnet should be lined up with the Vertical Plunger sensor bar switch, which turns the switch on. This is what the machine is waiting for. The switch is located mid way of the sensor bar at the red mark. If the
- [015 - Waiting for Strap Guide Arms at Bale Position 3.](https://www.balebandit.com/ufaqs/015-waiting-for-strap-guide-arms-at-bale-position-3/) - Note: The machine has turned on the Strap Guide Arms motor and sent them down. When the Strap Guide Arms magnet reaches the Bale Position 3 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 3 sensor bar switch. The switch is located near
- [013 - Waiting for Strap Guide Arms at Bale Position 1.](https://www.balebandit.com/ufaqs/013-waiting-for-strap-guide-arms-at-bale-position-1/) - Note: The machine has turned on the Strap Guide Arms motor and sent them down. When the Strap Guide Arms magnet reaches the Bale Position 1 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 1 sensor bar switch. The switch is located mid
- [014 - Waiting for Strap Guide Arms at Bale Position 2.](https://www.balebandit.com/ufaqs/014-waiting-for-strap-guide-arms-at-bale-position-2/) - Note: The machine has turned on the Strap Guide Arms motor and sent them down. When the Strap Guide Arms magnet reaches the Bale Position 2 sensor bar switch, the machine stops the motor. The machine is waiting for the magnet to reach the Bale Position 2 sensor bar switch. The switch is located mid
- [011 - Waiting for Vertical Plunger Up sensor bar switch to be on](https://www.balebandit.com/ufaqs/011-waiting-for-vertical-plunger-up-sensor-bar-switch-to-be-on/) - Note: After the machine has retracted the Vertical Plunger Swing cylinder, the Vertical Plunger Up magnet should be lined up with the Vertical Plunger sensor bar switch, which turns the switch on. This is what the machine is waiting for. The switch is located at the top of the sensor bar at the white mark.
- [010 - Vertical Plunger Up sensor bar switch is stuck on](https://www.balebandit.com/ufaqs/010-vertical-plunger-up-sensor-bar-switch-is-stuck-on/) - Note: Before the machine retracts the Vertical Plunger Swing cylinder it does a safety check on the Vertical Plunger Up sensor bar switch. It checks to see if the sensor bar switch is stuck on. If it is, it will wait until the sensor bar switch is off before continuing the operation. The switch is
- [009 - Waiting for Horizontal Plunger reed switch to be on.](https://www.balebandit.com/ufaqs/009-waiting-for-horizontal-plunger-reed-switch-to-be-on/) - Note: After the machine has retracted the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with a set of magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully retracted, - Check the air gap distance between the Horizontal Plunger
- [007 - Waiting for Horizontal Plunger reed switch to be on](https://www.balebandit.com/ufaqs/007-waiting-for-horizontal-plunger-reed-switch-to-be-on/) - Note: After the machine has retracted the Horizontal Plunger cylinder, the Horizontal Plunger reed switch should be lined up with a set of magnets, which turns the switch on. This is what the machine is waiting for. If the Horizontal Plunger cylinder is fully retracted, - Check the air gap distance between the Horizontal Plunger
- [Checking Banders](https://www.balebandit.com/ufaqs/checking-banders/)
- [Electrical Boards](https://www.balebandit.com/ufaqs/electrical-boards/)
- [Reed Switches](https://www.balebandit.com/ufaqs/reed-switches/) - https://youtu.be/XWkZSWi_QX4
- [006 - Waiting for Horizontal Plunger reed switch to be off](https://www.balebandit.com/ufaqs/006-waiting-for-horizontal-plunger-reed-switch-to-be-off/) - Note: Before the machine retracts the Horizontal Plunger cylinder, the Horizontal Plunger reed switch is in front of the first set of magnets. When the machine retracts the Horizontal Plunger cylinder it moves the first magnet away from the switch, which turns the Horizontal Plunger reed switch off. This is what the machine is waiting

## Events

- [Colorado Farm Show](https://www.balebandit.com/event/colorado-farm-show-2/) - Come see the Bale Band-It at Colorado Farm Show! The History of the Colorado Farm Show is a history of volunteers striving for agriculture excellence. It is fitting that one of the largest -- and oldest -- farm shows in the nation takes place in Weld County, the fourth largest agriculture producing county in the
- [Sun Belt Ag Expo](https://www.balebandit.com/event/sun-belt-ag-expo/) - Come see the Bale Band-It Booth# E-4-218 & in the field for lots of field demonstrating. The Sunbelt Ag Expo is an agricultural-based trade show held at Spence Field in Moultrie, Georgia. Known as “North America’s Premier Farm Show”® the annual event has more than 1200 exhibitors showcasing the latest in farming technology. Whether you
- [Ozark Fall Farmfest](https://www.balebandit.com/event/ozarks-fall-farmfest/) - Come see the Bale Band-It at Booth 77 E-Plex East Hall The Ozark Fall Farmfest is one of the largest Agricultural events in Southwest Missouri, with choice livestock for purchase, state of the art agricultural implements and vendors providing something for everyone.
- [Ohio State Farm Science Review](https://www.balebandit.com/event/ohio-state-farm-science-review/) - Come see the Bale Band-It at Booth# 529 Land Ave Features at a Glance There have been over 50 Farm Science Reviews, and over 30 at the Molly Caren Agricultural Center. Hundreds of demonstration plots and several million dollars worth of machinery. Over 22 years of inductions into the Farm Science Review Hall of Fame.
- [National Farm Machinery Show](https://www.balebandit.com/event/national-farm-machinery-show/) - Come see the Bale Band-It at Booth# West Wing 2548 The Future of Farming is coming to the National Farm Machinery Show, as the nation’s largest indoor farm show returns to the Kentucky Exposition Center in February. Start the year with row after row of quality products and services, hands-on demonstrations of the latest technological
- [KNID Agrifest](https://www.balebandit.com/event/knid-agrifest/) - Come see the Bale Band-It at Booth# A18 KNID AGRIFEST will be held at the Chisholm Trail Expo Center in Enid, Oklahoma.
- [Tulsa Farm Show](https://www.balebandit.com/event/tulsa-farm-show/) - Come see the Bale Band-It at Booth # 1001. Mid America Stockyards of Bristow, OK joins the Tulsa Farm Show as the provider of cattle for scholarship competition and equipment demos. Estimated Attendance 28,000 - 30,000.
- [Amarillo Farm & Ranch Show](https://www.balebandit.com/event/amarillo-farm-ranch-show/) - Come see the Bale Band-It at booth# C700 Each year, the Amarillo Farm and Ranch Show attracts over 30,000 attendees from Texas and Oklahoma Panhandles, New Mexico, Colorado and Kansas. The event encompasses every aspect of farming and ranching, and is a one-stop show for attendees to interact with manufacturers, obtain necessary CEU credits and
- [Farm Progress Show](https://www.balebandit.com/event/farm-progress-show/) - Come see the Bale Band-It at booth# 1256 (located on 12th street) The nation's greatest agricultural showcase. Today, the Farm Progress show enjoys a long and rich history. The Farm Progress Show is the nation’s leading outdoor farm show and features the most extensive state-of-the art information and technology available for today’s agricultural producers. The country’s
- [Four State Farm Show](https://www.balebandit.com/event/four-state-farm-show/) - Come see the Bale Band-It at Booth# 659 The 25-acre Farm Show site will over-flow with a vast array of farm equipment, seed, feed, agri-chemicals, livestock, farm buildings, grain bins, livestock handling equipment, tires, tools, trailers and much more. The tremendous range of agriculturally-related goods and services annually provides farmers and stockmen with a unique
- [Oklahoma City Farm Show](https://www.balebandit.com/event/oklahoma-city-farm-show/) - Come see the Bale Band-It at Booth # C313 & C315. The Southern Plains Farm Show is now the Oklahoma City Farm Show! Exhibits include all of the latest in agriculture with a full line of displays, including tractor, sprayer, tillage, harvest equipment, cattle management products, and more. In addition to indoor and outdoor exhibits,
- [Colorado Farm Show](https://www.balebandit.com/event/colorado-farm-show/) - Come see the Bale Band-It at Booth# 361-363 The History of the Colorado Farm Show is a history of volunteers striving for agriculture excellence. It is fitting that one of the largest -- and oldest -- farm shows in the nation takes place in Weld County, the fourth largest agriculture producing county in the United
- [Wichita Falls Ranch & Farm Expo](https://www.balebandit.com/event/wichita-falls-ranch-farm-expo/) - Come see the Bale Band-It at Booth# 216-217 Many exciting exhibits and activities are planned this year. Attendees will also have the opportunity to visit with over 350 vendors from 25 states and Australia, in over 175,000 square feet of exhibit space and not the mention over $5,000 in prizes and giveaways.
- [Mid-Tex Farm & Ranch Show](https://www.balebandit.com/event/mid-tex-farm-ranch-show/) - Come see the Bale Band-It at Booth# 12-13 The Mid-Tex Show offers exhibitors a first-rate forum to present their products and services to an expected attendance of more than 3,000 Central Texas farmers and ranchers. Visitors to the Equipment Depot Mid-Tex Farm & Ranch Show will have the opportunity to view top exhibits of the
- [Dakotafest 2014](https://www.balebandit.com/event/dakotafest/) - Schlaffman Farm in Mitchell, South Dakota Come see the Bale Band-It at booth # 809W Dakotafest continues to connect industry leading manufacturers/providers with decision making producers. The premier agricultural event in South Dakota, Dakotafest provides both exhibitors and attendees with all their farming and ranching needs. Dakotafest continues to grow with Farmers and Ranchers from
- [Hay & Forage Expo](https://www.balebandit.com/event/hayforageexpo/) - Working field demonstrations are a highlight of the Hay & Forage Expo. The two-day hay extravaganza showcases mowing, conditioning, tedding, merging, baling, hay handling and silage demonstrations on alfalfa acreage. Visitors will be able to compare the various equipment brands operating side-by-side under actual field conditions. A 10-acre exhibit field highlights displays from the
- [South Texas Farm & Ranch Show](https://www.balebandit.com/event/south-texas-farm-ranch-show/) - Come see the Bale Band-It in Booth #138-139 The South Texas Farm and Ranch Show has been a community tradition since 1982, with thousands of people enjoying hundreds of booths and exhibits, educational programs, golf tournament, and children's activities. The 2013 South Texas Farm & Ranch Show will feature over 125 booths and 25 guest
- [Mid-America Alfalfa Expo](https://www.balebandit.com/event/mid-america-alfalfa-expo/) - The Mid-America Alfalfa Expo & Conference is designed especially for alfalfa producers, livestock/dairy producers and others involved in alfalfa production, purchasing, hay feeding or processing. Two days jam-packed with information, education and innovation—all focused on helping hay and livestock producers improve production, performance and profitability. A trade show featuring some 100 exhibitors and a fundraising

## Categories

- [Shows](https://www.balebandit.com/category/shows/)

## Video Categories

- [General Support Videos](https://www.balebandit.com/video-category/generalsupport/)
- [Bale Band-It Seminar](https://www.balebandit.com/video-category/bale-band-it-seminar/)

## FAQ Categories

- [Bale Band-It 100](https://www.balebandit.com/ufaq-category/bb100/)
- [Bale Band-It 200](https://www.balebandit.com/ufaq-category/bb200/)
- [General Support Videos](https://www.balebandit.com/ufaq-category/mobilevideos1/)

## Event Categories

- [Field Demo](https://www.balebandit.com/events/category/field-demo/)
- [Static](https://www.balebandit.com/events/category/static/)